The camera will announce, “Device is ready for Use.”

Connect the power adapter cord to the wire coming from the camera.

NOTE: A surge protector or Uninterruptible Power Supply (UPS) is recommended.

Screw in the Wi-Fi Antenna to the Antenna Connector found on the back of the camera.

Your Night Owl standalone camera will be shipped with a Wi-Fi antenna, a power adapter cord, and a reset tool.

Perform the following procedures within range of your Wi-Fi network.

DO NOT mount your camera in its final location until you have successfully added it to the Night Owl Protect app and you are able to see its Live View.

Go to the google play store to download and install the Night Owl Protect app.

The following procedures require that you have already downloaded and installed the Night Owl Protect app onto your Smart Device and have created an account.

See your camera's setup instructions for further details. Night Owl standalone cameras are Wi-Fi devices that can be added to the Night Owl Protect app either by scanning its QR code, by using the network discovery method, or using the camera's serial number. The recorder has now been added to Night Owl Protect app. Confirm that you can see a live view of the camera.

Tap on the newly listed recorder to display the Device Settings screen.

Tap LIVE VIEW to display the Device screen.

The recorder is named and the following screen displays.

When you are finished tap the V symbol and then the (blue checkmark). Examples might be “Home,” “Cabin,” “Condo,” “Recorder,” etc. Tap on the Device Name line to name the recorder.

The Name Your DVR/NVR screen displays.

Tap the (blue checkmark) when you are finished renaming the channels.

There should be as many channels as there are cameras attached.

Swipe left to access the next channel.

Enter the new name using the keyboard.

If you want you can rename the channel with a descriptive name such as “Front Yard,” “Living Room,” etc. The Detecting Cameras screen displays as the app detects the available cameras. There will be four additional characters at the end that are already entered.

Only the first 16 characters are required to be entered.Enter the UID on the following screen, then tap (blue checkmark).Locate the UID on the support sticker on the top of the recorder.If the recorder and your Smart Device are not on the same network this method will not work.Tap OK on the message “Please Make Sure to Join the Same Network.”.Position your Smart Device's camera so that the QR code displays within the lighter rectangle on the app's screen.Locate the QR code on the top of the recorder.At this point you can add the recorder by.If you DO NOT have a Monitor Connected to your Recorder.

The recorder will now be listed when you log into the Night Owl Protect app. Click OK on the Successfully Logged In message that displays.Enter the Username and Password that you created with the app, then click Login. The Login to your Night Owl Protect Account screen displays.The Night Owl Protect Account screen displays.Enter your local password and click Login.The Internet Detected message displays on the recorder screen.Ensure the recorder is connected to your Internet using the included Ethernet cable.If a notice displays requesting permission to take pictures and record video, tap Allow.NOTE: If you did not setup a PIN or opt for using fingerprint recognition then you may to sign in by entering your username, email, or phone number. Log into the Night Owl Protect app by entering the PIN you created or by tapping USE FINGERPRINT.If you have a Monitor Connected to your Recorder.If your setup does not have a monitor connected to your recorder then follow the steps in the “If you DO NOT have a Monitor Connected to your Recorder” section. The quickest way to add a recorder to your app is by having a monitor connected to your recorder and following the steps in the following section.Go to the google Play store to download and install the Night Owl Protect app. More : How to Add a Device to the Night Owl Protect App for iOS

Night owl protect phone number